However, the process of drilling through these tiles can be just as complicated.
It takes patience and a certain technique to accomplish this task.
If you want to knowhow to drill through tilecorrectly, here is our step-by-step guide on the correct procedure.
The characteristics of the material youll be drilling through will determine the size of the task at hand.
The same principle goes for stone tiles that require stronger drill bit.
you’re able to buy new drill bits from your local hardware store.
Otherwise, your drill wont be performing optimally for this purpose.
Another useful advice is not to buy a regular drill bit for drilling through your tile.
Regular drill bits arent strong enough to penetrate the hard surface of the porcelain or ceramic tile.
Opt for carbide tipped masonry drill bit or diamond-tipped ones.
The first option is more expensive but it is incredibly durable and can bore through the toughest tiles.
One wrong move and you might end up cracking the tile or at the very least scratch its surface.
One easy trick you could use is to create some tension over the area using masking tape.
This technique will provide you with enough surface traction for the drill bit during the drilling process.
Simply cut a hole through the wood by placing it firmly over the drill hole.
After marking the surface of the tile, its time to bore a hole.
You may end up overheating the drill bit and cause vibrations over the tile surface.
The best trick is to apply even and gentle pressure.
Otherwise, youll break or crack the tile instead of drilling into it.
This is a good sign as youre almost there!
All is left to do is to bore through the wall before mounting the item on the tiled wall.
You may now change the drill bit to a regular one if you wish.
The main pointer to remember is to drill slowly and steadily for even results.
Step 6: Clean the Drilled Hole
The last step is the cleaning of the drilled hole.
Grab your vacuum cleaner and get all the debris out of the drilled hole.
After vacuuming the hole, use a wet sponge to wipe away any dust residue.
Carbide-tipped drill bits are more hard-wearing than other types of bits as they cope better with higher temperatures.
When these drill bits get hot, they dont stop functioning.
Just cool them down before each use.
If you dont want to use a block of wood as a drilling template, consider a drill guide.
These template guides are normally made of plastic and cost more than a block of wood.
If youd like to see a demonstration of how to drill a hole through tiles, watch this video
