This change can truly make your 1911 a personal statement.
From the patriotic red-white-n-blue to a rattlesnake skin pattern, they have you and your 1911 covered.
This can be a great DIY project.
Changing the grips on your 1911can be a quick and easy way to customize your gun. This process requires using the right tools so the grips are not damaged.
Which 1911 Is It?
Youll need to determine if you have a standard full-size frame or the smaller compact-frame pistol.
Commander style models, as an example, normally use full-size grips.
The 10mm TRP is a full-size 1911 with a full-size grip frame.
The best way to measure the screw-to-screw distance is with calipers or a mechanics ruler.
Take a look at the VZ Grips FAQ page to get more specifics.
For more details, visitwww.vzgrips.com/FAQ.
Before starting this grip replacement project or any work on firearms, be certain the firearm is UNLOADED.
Then you must decide what you want the new grips to feel like in your hand.
Your options include thicker for more in-the-hand surface, or thinner for a slimmer grip.
As it’s possible for you to tell, there are many options.
Be certain the tool you use properly fits the screws holding your 1911’s grips in place.
These provide more customization choices that aid with deciding what new grips you select and install.
The Process
VZ Grips representative Tillman also stressed a basic of firearms safety and Rule No.
1 before making any grip change: ensure the gun is unloaded!!!!
The entire process should take less than 10 minutes. Mike swapped out his Ronin 1911 grips for a pair Operator II grips from VZ Grips.
Before working on the pistol go beyond removing the magazine.
Next, grab the right tools and ensure a proper fit with the four screw heads.
Carefully remove the screws from the grips, and then remove the grips.
If they seem to be stuck, insert a small screwdriver into the magazine well and gently push up.
While you have the grips off, inspect the frame for cracks or wear.
Then tighten and check that the pistols magazine release and safeties work properly.
Changing the grips on a 1911 really shouldnt take longer than 10 minutes, says Tillman with VZ Grips.
VZ Grips offers universal bushings that will allow the use of slim and regular thickness grips.
This is a great DIY project to customize any 1911.
So be sure to visit VZ Grips and check out all the options they offer.
