I knew it wasnt going to be long before the aftermarket started to respond to this exceptional pistol.
[Be sure to catch Massad AyoobsSpringfield Armory Echelon reviewfor details about this 9mm pistol.]
One of those companies that has responded is Tyrant CNC.
Customizing your Springfield Echelon pistol is easier than ever. Shown here are a magazine release and extension from Tyrant CNC, as well as a Patriot CNC compensator on a stock Echelon handgun.
Today we are testing out their new magazine release and magazine extensions for the echelon.
The magazine extension is a +5 design and will come with an increased power spring.
And as you’re able to see, there are various color options available.
The popularity of the Echelon 9mm pistol means that there are a lot of options when it comes to tailoring the pistol for your needs.
Getting Started
Lets talk about the installation and testing process.
First, installation is extremely easy when it comes to these magazine extensions.
This loading procedure will ensure your spring isnt hung up and the follower is moving freely.
While Tyrant CNC upgrade parts are offered in black to match the stock Springfield Echelon, you can also select bolder colors.
Now its time to get out on the range and enjoy that +5 capacity increase.
I did batches of emergency reload drills dropping the magazine from chest height onto the ground.
I am 6 foot 4 inches tall, so that was a pretty solid drop each time.
In this photo, you can see that the Tyrant CNC magazine release for the Echelon removes the ambidextrous capability and provides a flush fit on the right side of the firearm.
I did this to specifically test the durability of the detent retaining mechanism.
All of this testing went 100% reliably, both in function and fit of the magazine extensions.
There were no issues such as hang-ups or drag on the magazines, whether they were full or empty.
The Tyrant CNC magazine extension is machined from 6061 aluminum and features an anodized finish. It comes with a +10% spring to ensure consistent feeding of ammunition.
Loaded and unloaded, the magazines dropped free and locked into the magazine well without issue.
The magazine release installation is again very easy.
Again, this was very easy due to the Echelons magazine release design.
The front of the Tyrant CNC magazine extension is nicely rounded with a smooth finish that feels good when held.
Why Upgrade the Magazine Parts?
By the way, it is optimized to fit the small and medium grip modules.
On to the magazine extension.
The Tyrant extension is made of 6061 aluminum to offer a balance of strength and weight.
It is finished off in a hardcoat anodized process in black, silver or gold at this time.
The edges of the Tyrant basepad have been smoothed and chamfer cut to ensure a snag-free design.
And, of course, that slight addition of weight will help the magazine drop free a bit faster.
The magazine release is $32.95 MSRP, and the magazine extensions are $39.95 MSRP.
